跳至主要内容

Abrasion & Corrosion Resistant Ceramic Ball Valves For Mining Slurry Delivered To Norway Again

 DN50 Ceramic ball valves with F316 body and ceramic lining were exported to Norway again to solve abrasion and corrosion problems in mining projects for our end user.


Considering the corrosive working environment, the body of the ball valves are changed from carbon steel A105 to stainless steel F316. The body is fully lined with ceramic as before. The medium is corrosive mining slurry with abrasive nickel and metal particles.


Abrasion & Corrosion Resistant Ceramic Ball Valves


The end user used metal seated ball valves before, but the metal seats were worn out easily under the corrosive and abrasive working conditions. After usage of our corrosion and abrasion resistant ceramic ball valves, thanks to the extreme physical harness and chemical stablity, the working life is increased dramatically and the maintenance cost and shutdown time are reduced a lot.


Abrasion & Corrosion Resistant Ceramic Ball Valves

When there are corrosive fluid and abrasive solid in the same application, the corrosion and abrasion problems are hard to be solved.

The abrasion problem is exacerbated under corrosive working condition, the corrosion problem is also aggravated under abrasive working condition. Ball valve with soft seat, corrosion resistant body and ball can solve the corrosion problem. Ball valve with metal seat may solve the abrasion problem. But only the ceramic ball valves can solve the abrasion and corrosion problems at the same time.


Abrasion & Corrosion Resistant Ceramic Ball Valves


Should any piping problems, please feel free to contact YFL at sales@YFLvalve.com for customized industrial valves solutions.


评论

发表评论

此博客中的热门博文

Dingya Crane Provides High-configuration Metallurgical Cranes

  Metallurgical cranes refer to   bridge-type cranes   used in metallurgy, casting and other places for lifting molten metal. They are also called metallurgical cranes. Nowadays, many small cast iron, cast steel and other metal smelting companies are using ordinary   single-girder cranes , but due to their design limitations, there are obvious hidden dangers, and the service life is greatly reduced. It is safer to switch to metallurgical driving as required. Compared with cranes used by general enterprises,   Dingya metallurgical cranes   have the characteristics of frequent use, harsh environment, high security performance and high automation. Starting from the transmission scheme, to the selection of components and wires, as well as component layout, wiring methods, and even electrical the sealing, cooling and other issues of the room and cabinet have been comprehensively considered and designed. Since there are many types of metallurgical cranes and each...
发表评论
阅读全文

Classification of diamond drill bits

  1. surface set diamond bit Explanation: A kind of diamond drill bit . The steel cylindrical bit body has a wire buckle on the upper part and a sintered drill head body on the lower part. The diamond particles are encrusted on the surface of the drill head body. The outer diameter of the carcass is slightly larger than the diameter of the steel body and the inner diameter is slightly smaller than the diameter of the steel body. There are grooves inside, outside and at the bottom that allow water to pass through the carcass. During drilling, washing fluid is used to carry away rock powder and cool the bit. Diamond-impregnated bits are all encrusted with natural diamonds and are therefore expensive, so they are only used in hard formations that are particularly difficult to drill. Diamond-impregnated drill bit is more commonly used in oil drilling. 2. impregnated diamond bit Explanation: A kind of diamond drill bit. A drill bit whose head body is uniformly encrusted...
发表评论
阅读全文

Diamond Polishing Pad

  Diamond polishing pad , also known as diamond polishing pad , is a flexible processing tool made of diamond as abrasive, combined with composite materials, with Velcro cloth on the back, glued to the joint of the grinding machine, used for grinding, stone, ceramic, glass, floor tile and other materials for special-shaped processing, suitable for stone polishing, line chamfering, curved plate and special-shaped stone processing. It can also be used for the special-shaped processing, repair and renovation of marble, concrete, cement floor, terrazzo, microcrystalline glass, artificial stone, floor tile, glazed tile and vitrified brick. It is an ideal stone grinding tool with strong grinding force, good durability, good softness, clarity and gloss. The whole process is divided into rough grinding, fine grinding, fine grinding and polishing four stages. The gloss is over 90°. Use 1, used for artificial stone, granite and marble stone processing, with a complete stand...
发表评论
阅读全文