跳至主要内容

What is plastic film recycling line?

 

Our plastic film recycling machine is designed to process and recycle waste plastic films into dry and clean flakes that can be used to make new plastic products. Plastic films that can be recycled include supermarket bags, shrink wrap, bubble wrap, and other plastic films commonly used in households, agriculture, and other industries.

Typically, the plastic film recycling process includes the following steps:

Shredding: The plastic films are shredded into tiny bits by our single-shaft shredder. This procedure aids in breaking down the plastic ingredients into smaller pieces.


Cleaning and washing: The shredded plastic films are then thoroughly cleaned and washed to remove any impurities. This is an important step in the recycling process because it guarantees that the recovered material is clean and devoid of foreign materials,our washing line machine is used for plastic film cleaning.


Drying: After washing the plastic sheets, the moisture is extracted using mechanical drying techniques--our centrifuge dewatering machine.

Extrusion: After the plastic film has dried, the extruder melts the plastic material and shapes it into little pellets. These pellets are then chilled and consolidated before being melted and shaped into various goods.

Overall, plastic film recycling lines are an important part of the greater endeavor to reduce the environmental impact of plastic waste and conserve natural resources by increasing the amount of material that may be reused.

评论

此博客中的热门博文

Chiller installation technology

1. When selecting the position of the lifting point, first consider the best position of the air circulation, and secondly consider the direction of the structure of the storage body. 2. The gap between the chiller and the slab should be greater than the thickness of the chiller . 3. All the slings of the chiller should be tightened, and the bolts and slings should be perforated with sealant to prevent cold bridge and air leakage. 4. When the ceiling fan is too heavy, use the No. 4 or No. 5 angle iron as the lintel. The lintel should span across the other roof and wall panels to reduce the load. Small Water Chiller Units   Laser Chiller Systems   Industrial Air Chiller

Full-servo pull up diaper production line

With the development of  technology, the diaper machinery industry is also progressing with it. This time, XINGYUAN DNW machinery launched full servo Pants production line. This production line can be compatible with two or three pieces, and can be designed into two or three pieces and other configurations according to customers' requirements. In order to meet the needs of customers, there are many optional configuration, O cutting unit, we used is the industry's top brands, PNO, HCH also used this brand. Basic configuration is controlled by servo motor, the brand is mitsubishi. Reasonable and solid square steel frame, painted with baking paint, with second working platforms. A customer asked how to make a diaper , and we showed him the whole production process. He was very pleased to say that your process for making diapers is the same as that of HCH and Xing Shi. The workshop is very clean, good quality, low price, very cost-effective. Now let's take a look ...

Brass ball valve making machine,Automatic brass ball making machine

  A Ball Valve is a quarter turn valve which can be opened or closed by applying pressure on the hollow and pivoting ball inserted into void opening. It is usually used as a switch that can control and direct the flow of fluids (including air, water, gas, oil etc.). When the hole in the ball is aligned to the flow, it is open and closed when it is perpendicular. Automatic brass ball machine  carries out the automatic test of the brass ball valve with manual loading of the components. More details, pls contact  Nicole office@desutrading.com