跳至主要内容

What can we do with the waste tires?

 

What are we going to do with the old tires?

What can we do with the increasing number of used tires? Here are some ideas for recycling old tires:

1. Make DIY handcrafts or construct them as protective walls, but this is not in high demand.

2. Create recycled rubber using tire recycling machines. The recycled rubber will be used for rubber runways or road paving.

3, Create rubber powder, which has numerous applications.

4. Make fuel oil.

Waste tires can be recycled in a variety of ways, but doing so properly is good for society.Lanrry specializes in the production of waste tire recycling plants that convert waste tires into fuel. Lanrry excels at producing waste tire recycling line plants that convert waste tires into fuel oil, rubber granules, and waste steel wire. If you know of any other good ways to recycle waste tires, please contact Lanrry, and you are welcome to come to our factory.

标签：

评论

发表评论

此博客中的热门博文

Full-servo pull up diaper production line

With the development of  technology, the diaper machinery industry is also progressing with it. This time, XINGYUAN DNW machinery launched full servo Pants production line. This production line can be compatible with two or three pieces, and can be designed into two or three pieces and other configurations according to customers' requirements. In order to meet the needs of customers, there are many optional configuration, O cutting unit, we used is the industry's top brands, PNO, HCH also used this brand. Basic configuration is controlled by servo motor, the brand is mitsubishi. Reasonable and solid square steel frame, painted with baking paint, with second working platforms. A customer asked how to make a diaper , and we showed him the whole production process. He was very pleased to say that your process for making diapers is the same as that of HCH and Xing Shi. The workshop is very clean, good quality, low price, very cost-effective. Now let's take a look ...
发表评论
阅读全文

Brass ball valve making machine,Automatic brass ball making machine

  A Ball Valve is a quarter turn valve which can be opened or closed by applying pressure on the hollow and pivoting ball inserted into void opening. It is usually used as a switch that can control and direct the flow of fluids (including air, water, gas, oil etc.). When the hole in the ball is aligned to the flow, it is open and closed when it is perpendicular. Automatic brass ball machine  carries out the automatic test of the brass ball valve with manual loading of the components. More details, pls contact  Nicole office@desutrading.com
发表评论
阅读全文

Copper rod machine melting,Copper rod upcasting machine,Copper plating line

China is short of copper, and China is also a big copper user. At present, the copper consumption of China's cable industry is about 7.5 million tons, accounting for more than 60% of China's total copper consumption, accounting for about 1 percent of the world's total copper conductor consumption, making it the largest copper user in the world. In order to solve the serious situation, the smart Chinese people try to use the machine which could meet the energy-saving requirement to produce the cooper rod. D&S copper rod making machine adopts the advanced fire refining technology to produce the￠8MM bright low-oxygen copper rod which is meet the international standards in the continuous casting line. The features of the production line are continuous casting and rolling process. There is no interruption from melting of raw material, casting process, rolling process and delivery of product, and it has high efficiency due to automatic control throughout the entire process. ...
发表评论
阅读全文