跳至主要内容

Tory RI 1.7 glass beads keep road marking reflective

 

The refractive index is the ratio of the light speed in a vacuum to the light speed in the medium. It is mainly used to describe the material's ability to refract light.

The material with higher refractive index, the ability to refract incident light is stronger.


In China, the standard of refractive glass beads for pavement GB/T24722-2009, according to the refractive index of glass beads, glass beads can be divided into three types: low refractive index glass beads, medium refractive index glass beads, and high refractive index glass beads, the refractive index (RI) is 1.50≤RI <1.70, 1.70≤RI <1.90, and RI≥1.90.


1.5 Refractive index glass beads: It is mainly made by crushing, sieving and melting recycled glass, the main component is silica.


1.7 Refractive Index Glass Beads: It adopt a matching method, first melting 1.7 refractive index glass, then furnacing glass beads.The main component is titanium dioxide, with a density of ≥3.0.The technical requirements and melting process are complicated, but the maximum retro reflective of 1.7 index glass beads can reach more than 1000mcd, and it has a good reflectivity in rainy night condition.Drop on the 1.7 beads on road without paint, it can reach about 200mcd.Particle size range: 0.212 ~ 2.0mm.

High refractive index glass beads

1.7 Index roadmarking glass beads

RI 1.7 beads for thermoplastic

1.7 Index roadmarking glass beads

（1.7 index beadsdrop onthermoplastic paint with 2% Titanium, the reading is 582mcd）

标签：

评论

发表评论

此博客中的热门博文

Dingya Crane Provides High-configuration Metallurgical Cranes

  Metallurgical cranes refer to   bridge-type cranes   used in metallurgy, casting and other places for lifting molten metal. They are also called metallurgical cranes. Nowadays, many small cast iron, cast steel and other metal smelting companies are using ordinary   single-girder cranes , but due to their design limitations, there are obvious hidden dangers, and the service life is greatly reduced. It is safer to switch to metallurgical driving as required. Compared with cranes used by general enterprises,   Dingya metallurgical cranes   have the characteristics of frequent use, harsh environment, high security performance and high automation. Starting from the transmission scheme, to the selection of components and wires, as well as component layout, wiring methods, and even electrical the sealing, cooling and other issues of the room and cabinet have been comprehensively considered and designed. Since there are many types of metallurgical cranes and each...
发表评论
阅读全文

Classification of diamond drill bits

  1. surface set diamond bit Explanation: A kind of diamond drill bit . The steel cylindrical bit body has a wire buckle on the upper part and a sintered drill head body on the lower part. The diamond particles are encrusted on the surface of the drill head body. The outer diameter of the carcass is slightly larger than the diameter of the steel body and the inner diameter is slightly smaller than the diameter of the steel body. There are grooves inside, outside and at the bottom that allow water to pass through the carcass. During drilling, washing fluid is used to carry away rock powder and cool the bit. Diamond-impregnated bits are all encrusted with natural diamonds and are therefore expensive, so they are only used in hard formations that are particularly difficult to drill. Diamond-impregnated drill bit is more commonly used in oil drilling. 2. impregnated diamond bit Explanation: A kind of diamond drill bit. A drill bit whose head body is uniformly encrusted...
发表评论
阅读全文

Diamond Polishing Pad

  Diamond polishing pad , also known as diamond polishing pad , is a flexible processing tool made of diamond as abrasive, combined with composite materials, with Velcro cloth on the back, glued to the joint of the grinding machine, used for grinding, stone, ceramic, glass, floor tile and other materials for special-shaped processing, suitable for stone polishing, line chamfering, curved plate and special-shaped stone processing. It can also be used for the special-shaped processing, repair and renovation of marble, concrete, cement floor, terrazzo, microcrystalline glass, artificial stone, floor tile, glazed tile and vitrified brick. It is an ideal stone grinding tool with strong grinding force, good durability, good softness, clarity and gloss. The whole process is divided into rough grinding, fine grinding, fine grinding and polishing four stages. The gloss is over 90°. Use 1, used for artificial stone, granite and marble stone processing, with a complete stand...
发表评论
阅读全文